Hot-sprayed coating

Hot spraying process inside tank with crude oil

Hot spraying process inside tank with crude oil

Hot-sprayed coatings are our optimal coating solution for inner and / or exterior surfaces of underground storage tanks or other construction parts intended for subterranean use such as large valves for example.

With an application time of up to one minute, our state of the art computerized hot spray equipment allows us to apply non-porous coatings up to a thickness of 3.0μm in one step. As a result, insulating coatings that offer a breakdown rating of 40.000 Volts (protection against lightning strikes with combustible materials) and prevention against corrosion can be fabricated on exterior surfaces. Alternatively, extremely conductive inner coatings up to a thickness of around 800 μm can be applied. These prevent any static charge occurring which could be dangerous when storing flammable liquids (conforms to t.R.b.F).

Hot spraying process inside tank with crude oil

Hot spraying process inside tank with crude oil